Bare, J, Gloria T, Norris GA, 2006: “Development of the Method and U.S. Normalization Database for Life Cycle Impact Assessment and Sustainability Metrics”, Environ. Sci. Technology, 40(16) pp 5108 - 5115.

Norris, GA, 2006: “Social Impacts in Product Life Cycles: Towards Life Cycle Attribute Assessment”. Int. J LCA, 11(1):97-104.

Nishioka Y, Levy JI, Norris GA. “Integrating Air Pollution, Climate Change, and Economics in a Risk-Based Life Cycle Analysis: A Case Study of Residential Insulation”, J of Human and Ecological Risk Assessment, Special Edition, “Human and Ecological Risk Assessment and Life Cycle Assessment: Intersections, Collisions and Future Directions” 2006 12:552-571.

Lesage, P., T. Ekvall, L. Deschênes and R. Samson. (2006) “Environmental assessment of brownfield rehabilitation using two different life cycle inventory models. Part I - Methodological approach”, Int J LCA Online First (DOI: http://dx.doi.org/10.1065/lca2006.10.279.1).

Lesage, P., T. Ekvall, L. Deschênes and R. Samson. (2006) “Environmental assessment of brownfield rehabilitation using two different life cycle inventory models. Part II – Case Study”, Int J LCA Online First (DOI: http://dx.doi.org/10.1065/lca2006.10.279.2).

Lesage, P., R. Samson and L. DESCHÊNES. 2006. "Considering the spatial aspect of land as a resource in LCA". Expert Workshop on Definition of Best Indicators for Biodiversity and Soil Quality for Life Cycle Assessment (LCA). Centre for Environmental Strategy, University of Surrey, 47-48.

Norris, GA., N. Suppen, A.P. do Nascimento, C.M.L. Ugaya, 2005: “Socio-Economic Impacts in Product and Building Life Cycles: Broadening from Environmental Life Cycle Assessment (LCA) to Sustainable LCA”, In Caldeira-Pires, A., M.C. de Souza Paula, and R. C. Villas-Boas, eds., Life Cycle Assessment: ISO 14040 In Latin America (in Spanish and Portuguese), Brasilia: EDITORES.

Norris, G.A., 2005: LCA Into the Future: LCA Going Global and Getting Social” Building Design and Construction, October.

B P Weidema, G A Norris (2005) Avoiding co-product allocation in the metals sector. Pp. 81-87 in A Dubreuil: "Life Cycle Assessment and Metals: Issues and research directions." Pensacola: SETAC.

Kohler, D., D. Bennett, G.A. Norris, J.D. Spengler, 2005: “Rethinking Environmental Performance from a Public Health Perspective: A Comparative Industry Analysis". Jou. Ind. Ecol. 9(3):143-167.

B P Weidema, K Christiansen, A M Nielsen, G A Norris, P Notten, S Suh, J Madsen. (2005) • Prioritisation within the integrated product policy. Environmental project no. 980. Copenhagen: Danish EPA.

Nishioka Y, Levy JI, Bennett DH, Norris GA, Spengler JD. A Risk-Based Approach to Health Impact Assessment for Input-Output Analysis – Part 1: Methodology. Int J LCA 2005 10(3): 193-199

Nishioka Y, Levy JI, Bennett DH, Norris GA, Spengler JD. A Risk-Based Approach to Health Impact Assessment for Input-Output Analysis – Part 2: Case Study of Insulation. Int J LCA 2005 10(4): 255-262

Laurin, L., M Goedkoop, G.A. Norris 2005: Practical LCA for Short Shelf Life Products, Analog Zone, August 2005

L. Laurin, G. A. Norris, M. Goedkoop; 2005: Practical LCA for short product life manufacturers, SPIE [5997-19], Optics East, October, 2005.

Ménard, J.-F., P. Lesage, L. Deschênes and R. Samson (2005). “Analyse du cycle de vie de deux technologies de traitement des matières résiduelles”, Vecteur Environnement, 38(5), pp.28-31.

Laurin, L., G.A. Norris 2005: “Total Cost Assessment: Looking at All the Costs Involved”; Chapter 6.2.3 of Transforming Sustainable Strategy into Action, Beloff et al., eds., John Wiley & Sons, Inc.

Norris, 2004: “Life Cycle Development: Expanding the Life Cycle Framework to Address Issues of Sustainable Development” in Frontiers of Engineering: Reports on leading-edge engineering from the 2003 NAE Symposium. Washington, DC: National Academy Press.

G. Rebitzer, ... G. Norris, ..., 2004: „Life Cycle Assessment – Part 1: Framework, Goal & Scope Definition, Inventory Analysis, and Applications”, Environment International, 30(5):701-721.

Ménard, J.-F., P. Lesage, L. Deschênes, and R. Samson (2004). “Comparative Life Cycle Assessment of Two Landfill Technologies for the Treatment of Municipal Solid Waste”, Int J LCA, 9(6), pp.371-378.

Suh, S. … and G. Norris, 2003: “System boundary selection in life-cycle inventories using hybrid approaches”, Environmental Science and Technology (18 December 2003).

Hofstetter, P. and G. Norris, 2003: “Why and how should we assess occupational health impacts in integrated product policy?”, Environmental Science and Technology 37(10):2025-2035.

Norris, 2003: “Detailed documentation for the TRACI impact characterization methods for acidification, eutrophication, and tropospheric ozone formation”, Journal of Industrial Ecology vol. 6(3):49-78.

Norris, G., Della Croce, F., and O. Jolliet, 2003: “Energy burdens of conventional wholesale and retail portions of product life cycles”, Journal of Industrial Ecology vol. 6(2)59-70.

Bare, J., G. Norris, D. Pennington, T. McKone, 2003: “TRACI: The tool for the reduction and assessment of chemical and other environmental impacts”, Journal of Industrial Ecology vol. 6(3):79-101.

Norris, G. and J. Segal, 2002: “Life cycle sustainable development: an extension of the product life cycle assessment framework to address questions of sustainable consumption and development”, in Life-cycle approaches to sustainable consumption, Workshop proceedings, International Institute of Applied Systems Analysis, Laxenburg, Austria; available at http://www.iiasa.ac.at/cgi-bin/pubsrch?IR02073.

Norris, and P. Yost, 2002: “A transparent, interactive software environment for communicating life cycle assessment results: An application to residential windows”, Journal of Industrial Ecology 5(4):15-28.

Norris, 2002: “Life Cycle Emission Distributions within the Economy: Implications for Life Cycle Impact Assessment”, Risk Analysis, 22(5):919-930.

Seppala, J, L. Basson, and G. Norris, 2002: “Decision analysis frameworks for life cycle impact assessment”, Journal of Industrial Ecology, 5(4):45-68.

Nishioka, Y., J. Levy, G. Norris, et al., 2002: “Integrating Risk Assessment and Life Cycle Assessment: A Case Study of Insulation”, Risk Analysis, 22(5).

Huijbregts, M., G. Norris, et al., 2001: “Framework for Modeling Data Uncertainty in Life Cycle Inventories”, Int. Jou. Life Cycle Assessment, 6(3):127-132.

Norris 2001: “Integrating economic analysis into LCA”, Environmental Quality Management, 10(3): 59-64.

Norris 2001: “The requirement for congruence in normalization,” Int. Jou. Life Cycle Assessment, 6(2): 85-88.

Norris 2001: “Integrating Life Cycle Cost Analysis and LCA,” Int. Jou. Life Cycle Assessment, 6(2): 118-121.

Norris 2001: “Estimating the value of life cycle assessments,” Proceedings, 1st International Conference on Life Cycle Management, LCM2001, pp. 157-162, Copenhagen.

Pennington D.W., Norris G., Hoagland T. and Bare J.C., 2001 “Metrics for environmental comparison of process and product alternatives in a holistic framework”, Process Design Tools for the Environment, Sikdar S.K. and El-Halwagi M.M., editors. Taylor and Francis.

Norris 2000: “Integrating economic analysis into LCA,” Proceedings, 4th International Conference on EcoBalance, Tsukuba, Japan.

Norris 2000: “Upstream paddling: prioritizing your green building efforts”. Energy Design Update, September.

Norris 2000: “Implications of Inventory Structure for Life Cycle Impact Assessment and Uncertainty Analysis”, in Life Cycle Impact Assessment Sophistication: An International Workshop, EPA/600/R-00/023, US EPA/ORD, Cincinnati, OH.

Norris, G.A., P. Fisk III, J. McLennan, 2000: “Key inputs and leverage to green construction projects,” in Proceedings, SB2000, Best, The Netherlands: Aeneas Technical Publishers.

McLennan, J., G.A. Norris, P. Fisk III, 2000: “The Future of Material Selection,” in Williams et al., eds: Plus-Ultra: The NIST Report for the MSU EPICenter, Washington, DC: National Institute of Standards and Technology.

Nishioka Y., J. Levy, P. Hofstetter, G. Norris, A. Wilson, J. Spengler, 2000: “Regional health effects of demand-side energy management using exposure efficiency,” Proceedings, 4th International Conference on EcoBalance, Tsukuba, Japan.

Pennington D.W., Norris G., Hoagland T. and Bare J.C., 2000 “Comparison metrics for life cycle impact assessment and process design”, Environmental Progress, 19(2): 83-91.

Norris, G.A. 1999. Systematic/Holistic Application of Environmental Life Cycle Assessment to Building Material Selection. Research Report to BNIM Architects, Kansas City, MO. July.

Norris, G.A. 1998. Life Cycle Impact Assessment for the impact categories of Acidification, Eutrophication, and Photochemical Oxidant Formation. Research Report to US EPA / ORD, Cincinnati, OH. August.

Norris, G.A. 1998. “Multiplicity of Sites in the Upstream Environmental Impacts of Products and Sectors.” Presented at Gordon Research Conference on Industrial Ecology, New London, NH. June.

Norris, G.A. 1998. Background Review of Environmental and Economic Impact Studies and methods Related to Recycling of Construction and Demolition Debris. Research Report to US EPA / OPPT, Washington, DC. March.

Norris, G.A. 1998. Direct and Embodied Pollution Burdens Associated with US Economic Sectors. Research Report to National Renewable Energy Laboratory, Golden, CO. October.

Norris, G.A. 1998. Direct and Upstream Emissions of Carbon Dioxide from Fossil Fuel Combustion. Research Report to National Renewable Energy Laboratory, Golden, CO. February.

Barnthouse, L., J. Fava, K. Humphreys, R. Hunt, L. Laibson, S. Noesen, G. Norris, J. Owens, J. Todd, B. Vigon, K. Weitz, J. Young, eds., 1997. Life Cycle Impact Assessment: The State of the Art. Pensacola, FL: Society of Environmental Toxicology and Chemistry.

Norris, G.A. 1997. A Screening Analysis of Federal Purchasing – An Input/Output-based Life Cycle Assessment of the Upstream Environmental Burdens of US Federal Purchasing. Research Report to National Institute of Standards and Technology, Gaithersburg, MD. November.

Norris, G.A. 1997. “An Integrated Economic/Environmental Accounting Analysis System for the USA.” In: Regional and National Material Flow Accounting: From Paradigm to Practice of Sustainability. Wuppertal Institute for Climate, Environment, and Energy, Germany.

Norris, G.A. 1996. "Advancing LCA to Support Life Cycle Design for Environment." Environmentally Conscious Design and Manufacturing -- Recent Advances, Shahinpoor and Weinrach, eds., ECM Press, Albequerque, NM.

Norris, G.A. 1996. "Life Cycle Inventory Interpretation and Decision Making In the Presence of Uncertainty." in: Technologies for a Sustainable Environment: Proceedings of 89th Mtg of Air & Waste Management Association.

Jones, Norris, Atwood, Todd, White and Ayers, 1996. Multi-media Fate Modeling and Risk Considerations Applied to Life Cycle Impact Assessment. US EPA Risk Reduction Laboratory.

Norris, G.A. 1996. " Sensitivity Analysis for Estimating Energy Conservation Potential." Energy Services Journal, 2(2): 65-85.

Norris, G.A., and H.E. Marshall. 1995. Multiattribute Decision Analysis Method for Evaluating Buildings and Building Systems. NISTIR 5663, US Dept. of Commerce - National Institute of Standards & Technology. Sept.

Lippiatt, B.C. and G.A. Norris, 1995. "Selecting Environmentally and Economically Balanced Building Materials." Proceedings, Second International Green Buildings Conference - 1995. NIST Special Publication #888, Washington, DC. pp 37-46.